• 1 Answer SOURCE: I modified a little what Worldvet had done. I opened the door as if to change the ink cartridges. I first used a pair of needle nosed pliers and carefully took out the sponge type pad which is along bottom of the printhead travel lane. One will see the two center plactic guides within this lane.

The sponge is very delicate, so be very gentle in removing it. It has ink residue in it so use gloves if necessary and upon removal place the sponge on a paper towel folded in triplicate so the ink does not bleed through the towel. Remember to what position it was before removal, so there is no problem when you try to replace the sponge after cleaning. The second sponge I removed as follows: With the power on, I pressed the ink cartridge removal light (red) (far left) once. This moved the print head to the 'far left', before the position to change cartridges. With the power still on and the printhead to the far left, I was able to very gently (with the same needlenose Pliers) remove the sponge under where the printhead was parked. It too is very delicate and be careful not to rip it.

It too, one will find, has two plastic slots on the botton which the sponge will have to be returned into. I then turned the printer off, which caused the printer head to return to the parked position. I took both sponges, and with Alcohol (Pharmacy type), I placed the sponges in a disposable plastic bowl and filled it with the alcohol.

It your willing to learn, youll have a blast playing through the game, if not, enjoy th easy and normal modes. Non-gamers can easily engoy EASY and NORMAL modes, but the HARD and SUPERHARD modes require a lot of patience. Non-gamers can easily engoy EASY and NORMAL modes, but the HARD and The controls works great, but require a lot of practice to master. Samba de amigo wii iso.

EPSON Reset Waste Ink Pad SERIES L1300 UNLIMITED PC & LIFETIME - Delivery. RESET EPSON SERIES L110+L210+L300+L350+L355+L550+L555. Here is the simple way to reset the waste ink counter on Epson L1300 printer by yourself, you don’t need to bring it to the stores and it also fix the printer’s.

I gently used the needle nosed pliers (Closed) as a device to gently press on the sponges which were submerged into the alcohol. I continued to alternate up and down the sponge pads, causing the alcohol to dilute and clean the pads. When the alcohol became saturated with the ink from the pads, I took the pads out of the alcohol bowl and placed the pads on a triple folded paper towel so the remaining ink would not bleed through anything. I then took the bowl of alcohol/ink and while I flushed the toilet and the water was going down, I emptied the alcohol down the middle of the water spout as the toilet water was completing its flush. This keeps any ink from touching any porcelion. I then refilled the plastic bowl again with fresh alcohol and resubmer.